欢迎来到红宝电子!
分类 | 系列/型号 | number of contacts | pitch | rated voltage | insulation resistance | dielectric withstanding voltage | 查看详情 | pdf下载 |
细线类型 | 40 pos. (hd1), 30 pos. (hd2) | 0.5 mm | ac, dc each 100 v/ contact | 1000 megohm min. | ac 250 vr.m.s. (1 minute) | |||
50 positions | 0.4 mm | ac, dc each 1 a/ terminal | ac, dc each 100 v/ terminal | 70 milliohm max. | ||||
21, 31, 41, 51 | 0.8 a max./ contact (receptacle), 0.7 a max./ contact (plug) | 500 vacr.m.s. (1 minute) | 100 megohm min. | 40 milliohm max. | ||||
1 row: 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30, 2 rows: 5, 7, 9, 11, 13, 15, 17, 19, 21, 31, 41 | 1a | 500 vacr.m.s. (1 minute) | 100 megohm min. | 40 milliohm max. | ||||
30 positions | 1 mm | ac, dc each 1 a/ pos. | ac, dc each 200 v/ pos. | 40 milliohm max. | ||||
30, 34, 40, 50 positions | 0.3 mm | ac, dc each 0.25 a/ contact | ac, dc each 50 v/ contact | 100 vacr.m.s. (1 minute) | ||||
40 | ac, dc each 0.3 a/ contact | ac, dc each 50 v/ contact | 250 vacr.m.s. (1 minute) | 100 megohm min. | ||||
30 | 1a | 500 vacr.m.s. (1 minute) | 100 megohm min. | 40 milliohm max. | ||||
30 | ac, dc each 1 a/ contact | ac, dc each 200 v/ contact | 500 vacr.m.s. (1 minute) | 100 megohm min. | ||||
一般电线用 | 16, 24 pos. | vbus (terminal no. a4, a9, b4, b9) dc 5 a (total) gnd (terminal no. a1,a12,b1,b12) dc 6.25 a (total) vconn (terminal no. b5) dc 1.25 a others: dc 0.25 a/ pin | ac 20 vr.m.s. | 40 milliohm max. (initial) | ac 100 vr.m.s. (for 1minute) | |||
24 pos., 22pos. (22 position slim plug) | vbus (terminal no. a4, a9, b4, b9) dc 5 a (total) gnd (terminal no. a1,a12,b1,b12) dc 6.25 a (total) vconn (terminal no. b5) dc 1.25 a others: dc 0.25 a/ pin | ac 20 vr.m.s. | 40 milliohm max. (initial) | ac 100 vr.m.s. (for 1minute) | ||||
type-c plug on both ends | pvc / black tpe / black | 24 pos. | usb 3.1 gen 2: 5 a max. usb 3.1 gen 1: 3 a max. | ac 20 vr.m.s. | ||||
1 pin | ac/dc 2 a | 30 milliohm max. | #26 to #24 awg equivalent (single wire), (conductor diameter: 0.4 to 0.53 mm), covered diameter: 2.0 mm max., * twisted wire (including spare solder) can not be used. | 5 times | ||||
2, 4 positions | culus certified product: 3 a/pos. standard product: , 4 a/pos. (for 2-pos.) 3 a/pos. (for 4-pos.) | culus certified product: ac/dc 250 v, standard product: ac/dc 300 v | 30 milliohm max. (initial), 45 milliohm max. (after test) | 10 megohm min. | ||||
1 pin | 2a | 30 ohm max. | #26 to #24 awg (single wire), (diameter: 0.4 to 0.51 mm), outer cable diameter: 1.15 mm max. (recommended) | 5 times | ||||
1 pin | ac/ dc 4 a | 30 milliohm max. | #26 to #24 awg (stranded cable), (outer cable diameter: 0.9 to 1.6 mm) | 20 times | ||||
2 positions | 2a | ac/ dc 200 v | 30 milliohm max. | 2000 vacr.m.s. (1 minute) | ||||
1 pin | ac/ dc 4 a | 30 milliohm max. (initial), 45 milliohm max. (after test) | #28 to #24 awg (stranded cable), (outer cable diameter: 0.9 to 1.6 mm) | 20 times | ||||
2 to 10, 12 | 3 a | 1500 vacr.m.s. (1 minute) | 100 megohm min. | tin plating: 20 milliohm max., gold plating: 10 milliohm max. | ||||
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 | 3a | 1000 vacr.m.s. (1 minute) | 1000 megohm min. | 10 milliohm max. | ||||
2 to 15 positions | 3a | 1500 vacr.m.s. (1 minute) | 100 megohm min. | tin plating: 20 milliohm max., gold plating: 10 milliohm max. | ||||
10, 16, 20, 26, 30, 34, 40, 50, 60 | 2.53 mm pitch, 2 row | 1a | 500 vacr.m.s. (1 minute) | 1000 megohm min. | ||||
3 to 4 positions | 1 a | 500 vacr.m.s. (1 minute) | 100 megohm min. | 20 milliohm max. | ||||
2, 3 | 15 a | 1000 vacr.m.s. (1 minute) (initial) | 100000 megohm min. (initial) | 20 milliohm max. (initial) | ||||
10, 16, 20, 26, 30, 34, 40, 50, 60 | 2.54 mm 2 rows | 1a | 500 vacr.m.s. (1 minute) | 1000 megohm min. | ||||
4, 6, 8, 10, 12, 14 16,18, 20, 22, 24, 26, 28, 30 | 2.54 mm 2 rows | 3a | 1000 vacr.m.s. (1 minute) | 1000 megohm min. | ||||
1 row: 5, 10, 15, 20, 25, 30, 2 rows: 10, 16, 20, 26, 30, 34, 40, 50, 60 | 2.54 mm 1 row/ 2 rows | 3a | 1000 vacr.m.s. (1 minute) | 1000 megohm min. | ||||
车载用 | 4 positions (2 pos. for differential signal and 2 pos. for power supply) | stq (awg#26, cable outer diameter φ 4 mm) | 1.2 to 1.6 mm | -40 deg. c to 85 deg. c | ||||
177 positions (2 blocks) (68 positions 109 positions) | initial: 5 milliohm max. post test: 10 milliohm max. | 100 megaohm min. | signal contacts: avss 0.3 sq to 0.5 sq power contacts: avss 0.5 sq to 1.25 sq | ambient temperature: -40 deg. c to 105 deg. c ambient temperature temperature rise due to conduction: 120 deg. c max. | ||||
100 positions (2 blocks) 4 positions for mating detection | 3a | 66.6 n max. | both tin and gold plating: avss0.3sq to 0.5sq | -40 deg. c to 120 deg. c | ||||
4, 8, 12, 16, 20, 24, 32, 40 | 3 a(所有针) | 初始不超过5mω,后测不超过10mω | -40℃至 85℃ | 130℃(环境温度 通电升温) | ||||
19 positions | 0.5 a/ pos. | contact area: 30 milliohm max., shell area: 50 milliohm max. (variation from initial value) | ac 500 v (unmated condition) | 100 megohm min. (unmated condition) | ||||
7, 12, 16, 20, 24, 28, 32, 36, 40 pos. | 3a | 5 milliohm max. (initial), 10 milliohm max. (after test) | -40 deg. c to 85 deg. c | 130 deg. c, (ambient temperature temperature rise due to conduction) | ||||
10 芯 | 2.2 a (电源/接地线) | 最大8 milliohm. (初始) | 最小100 megohm. (嵌合时) | ac 1,000v, (嵌合后使用1分钟) | ||||
4-poles | ac 500 vr.m.s. (1 minute) | shielded twist quad cable (awg 26×4c) | -40 deg. c to 105 deg. c | |||||
[mx49a] board-to-cable/ cable-to-cable (non-waterproof), [mx49c] cable-to-cable (waterproof) | 4 positions | 100 megohms min. | ac 1000 vr.m.s. applied for 1 minute (when mated) | quad shielded twisted pair cable (harness product only) | ||||
mx57a series: 30 pos. (signal: 26pos. mating detection: 4pos.), mx57b series: 48 pos. (signal: 44pos. mating detection: 4pos.) | 5 milliohm max. (initial: signal terminal) | -40 deg. c to 80 deg. c | 120 deg. c (ambient temperature temperature rise by current carrying) | avss 0.3, avss 0.5, avssx 0.5f | ||||
4 positions | 100 megohm (mated condition) | ac 1000 vr.m.s. (applied voltage) per minute (mated condition) | signal line is shielded twisted pair wire (for harness) | 1.6mm | ||||
2 positions | ac 1000 vr.m.s. (applied voltage) 1 minute (mated condition) | 100 megohm min. (mated condition) | shielded twisted pair wire (for harness) | 1.6 mm | ||||
straight, 1 row: 5, 7 pos., 2 rows: 12, 16, 20, 24, 28, 32, 36, 40 pos., right angle, 1 row: 3, 5, 7 pos., 2 rows: 8, 12, 16, 20, 24, 28, 32, 36, 40 pos. | straight, 2 rows: 12, 20, 32 pos., right angle, 1 row: 3, 5, 7 pos., 2 rows: 8, 12, 16, 20, 24, 32, 36 pos. | 2 rows: 12, 16, 20 pos. | 1 row: 3, 5, 7 pos., 2 rows: 8, 12, 16, 20, 24, 28, 32, 36, 40 pos. | 3 a | ||||
2 -position | ac 1000 v applied for 1 minute (when mated) | 100 megohm min. (when mated) | t 1.6 mm | shielded twisted-pair cable. (sold as harness product) | ||||
4 pos. | 8 milliohm max. (initial) | 100 megohm min. | 500 vacr.m.s. (1 minute) | -40 deg. c to 85 deg. c | ||||
50 ohm/ 75 ohm | 50 ohm: coaxial: 1, 2 pos., coaxial power: 2 (coaxial 1, power 1), 75 ohm: coaxial: 1, 2 pos., coaxial power: 2 (coaxial 1, power 1), 3 (coaxial 2, power 1) | 50 ohm: dc to 1.5 ghz, 75 ohm: dc to 1 ghz | 1000 vacr.m.s. (1 minute) | 100 megohm min. | ||||
39 positions (different keying available) | 3 a | 5 milliohm max. (initial) | 98 kpa min. (initial) | 20 g (50 to 1000 hz), each pole/ 9 hours | ||||
2, 4, 6 positions | 5 milliohm max. (initial), 10 milliohm max. (after test) | 3 a | 100 megohm min. | 98 kpa min. (initial) | ||||
pin side: 70, 98, 104, 135 positions, socket side: 31, 34, 35 positions | signal: 2.2 a, power: 5.7 a | 1000 vacr.m.s. (1 minute) | 100 megohm min. | signal: 8 milliohm max., power: 5 milliohm max. | ||||
2.5 mm | 12, 18, 26, 34, 36, 40 针 | 3a | 1000 vacr.m.s. (1分钟) | 100 megohm 以下 | ||||
6.7 mm | 2 | board-to-cable: dc to 3 ghz, cable-to-cable: dc to 6 ghz | 1000 vacr.m.s. (1 minute), (inner contact/ outer contact) | 100 megohm min., (inner contact/ outer contact) | ||||
2.5 mm | 1 row: 4, 5, 6, 7, 10, 2 rows: 14, 16, 18, 22, 30 | 3a | 1000 vacr.m.s. (1 minute) | 100 megohm min. (initial) |